Bearbeiten von „HostAPD“

[[Kategorie:Netzwerk]]

== Installation ==
<pre>
apt-get install hostapd bridge-utils iw dnsmasq

perl -pi -e 's!^#DAEMON_CONF=.*!DAEMON_CONF="/etc/hostapd/hostapd.conf"!' /etc/default/hostapd
</pre>

=== Variante ohne Bridge ===
<pre>
FN=/etc/hostapd/hostapd.conf
SID=rex-regio
CODE=geheim
test -e $FN && mv $FN $FN.$(date "+%Y%m%d.%H%M%S")
cat >$FN <<EOS
# interface used by access point
interface=wlan0
# firmware driver
driver=nl80211
# access point SSID
ssid=$SID
# operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g)
hw_mode=g
# access point channel
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
# key management algorithm
wpa_key_mgmt=WPA-PSK
wpa_passphrase=$CODE
wpa=2
# set ciphers
wpa_pairwise=TKIP
rsn_pairwise=CCMP
EOS
<pre>