Wireguard: Unterschied zwischen den Versionen

Aus Info-Theke
Zur Navigation springen Zur Suche springen
 
(8 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 226: Zeile 226:
IP_CLIENT=$IP_CLIENT
IP_CLIENT=$IP_CLIENT
PORT_SERVER=$PORT
PORT_SERVER=$PORT
ALLOWED_IPS=$ALLOWED_IDS
ALLOWED_IPS=$ALLOWED_IPS
PRIV_KEY=$privateKey
PRIV_KEY=$privateKey
PUB_KEY=$PUBLIC_KEY_CLIENT
PUB_KEY=$PUBLIC_KEY_CLIENT
Zeile 252: Zeile 252:
VPN_ID=wg0
VPN_ID=wg0
./Build $VPN_ID
./Build $VPN_ID
</syntaxhighlight>
* VPN neu starten
<syntaxhighlight lang="bash">
# Falls VPN läuft:
wg-quick down wg0
wg-quick up wg0
</syntaxhighlight>
</syntaxhighlight>


Zeile 281: Zeile 287:
VPN_ID=wg0
VPN_ID=wg0
CLIENT=joe
CLIENT=joe
IP_CLIENT=10.58.1.10/32
IP_CLIENT=10.10.100.112/32
ALLOWED_IPS=10.58.1.0/24
ALLOWED_IPS=10.10.100.0/24
./ExportClient $VPN_ID $CLIENT $IP_CLIENT $ALLOWED_IPS
./ExportClient $VPN_ID $CLIENT $IP_CLIENT $ALLOWED_IPS
</syntaxhighlight>
</syntaxhighlight>
Zeile 288: Zeile 294:
== Linux Client einrichten ==
== Linux Client einrichten ==
<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
apt install wireguard-tools
apt install wireguard-tools resolvconf
</syntaxhighlight>
</syntaxhighlight>
=== Script erzeugen ===
=== Script erzeugen ===
Zeile 314: Zeile 320:
   else
   else
     local fnPrivate=/etc/wireguard/db/$VPN_ID.private.key
     local fnPrivate=/etc/wireguard/db/$VPN_ID.private.key
    mkdir -p $(dirname $fnPrivate)
     echo $PUB_KEY > db/$VPN_ID.public.key
     echo $PUB_KEY > db/$VPN_ID.public.key
     echo $PRIV_KEY > $fnPrivate
     echo $PRIV_KEY > $fnPrivate
Zeile 344: Zeile 351:
fi
fi
SCRIPT
SCRIPT
chmod +x $FN_SCRIPT
echo "= created: $FN_SCRIPT"
echo "= created: $FN_SCRIPT"
</syntaxhighlight>
</syntaxhighlight>


Zeile 353: Zeile 362:
CONFIG=/Downloads/wg0.joe.conf
CONFIG=/Downloads/wg0.joe.conf
./Import $CONFIG
./Import $CONFIG
</syntaxhighlight>
=== VPN neu starten ===
<syntaxhighlight lang="bash">
# Falls VPN läuft:
wg-quick down wg0
wg-quick up wg0
</syntaxhighlight>
</syntaxhighlight>

Aktuelle Version vom 2. April 2023, 13:07 Uhr

Links[Bearbeiten]

Installation[Bearbeiten]

apt install wireguard resolvconf

Zentrale einrichten[Bearbeiten]

Ablauf der Konfiguration[Bearbeiten]

  • Scripts erzeugen: Kapitel "Scripts erstellen"
  • Server konfigurieren: Kapitel "Konfiguration Server"
  • Beliebig viele Clients konfigurieren: "Konfiguration existierender Client (Public Key bekannt)" oder "Erzeugen Client (Keys werden erzeugt)"
  • Wireguard-Konfiguration erzeugen: Kapitel "Wireguard Konfiguration erzeugen"
  • Client löschen:
    • db/<vpn-id>/clients/<client>.conf löschen
    • Kapitel "Wireguard Konfiguration erzeugen"
  • Client ändern (z.B. erlaubte Netze)
    • db/<vpn-id>/clients/<client>.conf ändern
    • Kapitel "Wireguard Konfiguration erzeugen"
  • neuer Client:
    • "Konfiguration existierender Client (Public Key bekannt)" oder "Erzeugen Client (Keys werden erzeugt)"
    • Wireguard-Konfiguration erzeugen: Kapitel "Wireguard Konfiguration erzeugen"

Scripts erstellen[Bearbeiten]

Script für Initialisierung: Build[Bearbeiten]

FN_SCRIPT=/etc/wireguard/Build
cat <<'ESCRIPT' >$FN_SCRIPT
#! /bin/bash
VPN_ID=$1

function Server(){
  source db/$VPN_ID/server.conf
  cat <<EOS >$VPN_ID.conf
[Interface]
Address = $IP_SERVER 
ListenPort = $PORT
PrivateKey = $PRIVATE_KEY

EOS
  echo "= created: $VPN_ID.conf"
}

function Client(){
  local config=$1
  source $config
  local fn=$VPN_ID.conf
  cat <<EOS >>$fn
[Peer]
# client $CLIENT
PublicKey = $PUB_KEY
AllowedIPs = $ALLOWED_IPS

EOS
}
function Usage(){
  echo "Usage: Build VPN_ID"
  echo "Example: Build wg0"
  echo "+++ $*"
}
if [ -z "$VPN_ID" ]; then
  Usage "missing VPN_ID"
elif [ ! -d db/$VPN_ID ]; then
  Usage "VPN_ID not defined: $VPN_ID"
  echo "= available:"
  for dir in db/*; do
    test -d $dir/clients && echo $(basename $dir)
  done
else
  Server
  for client in db/$VPN_ID/clients/*.conf; do
    Client $client
  done
fi
ESCRIPT
echo "created: $FN_SCRIPT"
chmod +x $FN_SCRIPT

Script zum Server konfigurieren[Bearbeiten]

FN_SCRIPT=/etc/wireguard/BuildServer
cat <<'SCRIPT' >$FN_SCRIPT
#! /bin/bash
VPN_ID=$1
IP_SERVER=$2
IP_PUBLIC=$3
HOST=$4
PORT=$5
DNS_SERVER=$6

test -z "$HOST" && HOST=$(hostname)
test -z "$PORT" && PORT=51820
test -z "$DNS_SERVER" && DNS_SERVER=9.9.9.9

function Usage(){
  echo "Usage BuildServer VPN_ID IP_VPN IP_PUBLIC [HOST [PORT [DNS_SERVER]]]"
  echo "Example: BuildServer wg0 10.10.100.1/24 207.180.255.91 dragon 51820 9.9.9.9"
  echo "+++ $*"
}

function Create(){
  mkdir -p db/$VPN_ID/clients
  local fnPrivateKey=db/$VPN_ID/private.key
  if [ ! -e $fnPrivateKey ]; then
    wg genkey > $fnPrivateKey
    chmod go= $fnPrivateKey
    echo "= created: $fnPrivateKey"
  fi
  local fnPublicKey=db/$VPN_ID/public.key
  if [ ! -e $fnPublicKey ]; then
    wg <$fnPrivateKey pubkey >$fnPublicKey
    echo "= created: $fnPublicKey" 
  fi
  local fnConfig=db/$VPN_ID/server.conf
  cat <<EOS >$fnConfig
VPN_ID=$VPN_ID
IP_SERVER=$IP_SERVER
PORT=$PORT
DNS_SERVER=$DNS_SERVER
IP_PUBLIC=$IP_PUBLIC
PRIVATE_KEY=$(cat $fnPrivateKey)
PUBLIC_KEY=$(cat $fnPublicKey)
EOS
  chmod og= $fnConfig
  echo "= created: $fnConfig"
}

if [ -z "$IP_SERVER" ]; then
  Usage "missing IP_SERVER"
elif [ ${1/\//} != $1 ]; then
  Usage "wrong IP_SERVER: $IP_SERVER"
else
  Create
fi
SCRIPT
chmod +x $FN_SCRIPT
echo "= created: $FN_SCRIPT"

Script zur Clientkonfiguration: ImportClient[Bearbeiten]

Zur Anwendung dieses Scripts ist der Public Key schon vorhanden. 

FN_SCRIPT=/etc/wireguard/ImportClient
#! /bin/bash
cat <<'SCRIPT' >$FN_SCRIPT
VPN_ID=$1
CLIENT=$2
PUBLIC_KEY=$3
IP_CLIENT=$4
ALLOWED_IPS=$5

function Usage(){
  echo "Usage: ImportClient VPN_ID CLIENT_NAME IP_CLIENT PUB_KEY ALLOWED_IDS"
  echo "Example: ImportClient wg0 joe 10.10.100.44/32 0fajdkafkdla02jiw902902= 10.10.100.0/24,10.10.101.0/24"
  echo "+++ $*"
}

function Create(){
  mkdir -p db/$VPN_ID/clients
  local fnConfig=db/$VPN_ID/clients/$CLIENT.conf
  cat <<EOS >$fnConfig
CLIENT=$CLIENT
PUB_KEY=$PUBLIC_KEY
ALLOWED_IPS=$ALLOWED_IPS
EOS
  echo "= created: $fnConfig"
}

if [ -z "$ALLOWED_IPS" ]; then
  Usage "missing arguments"
elif [ ! -d db/$VPN_ID ]; then
  Usage "unknown VPN_ID: $VPN_ID"
else
  Create
fi
SCRIPT
chmod +x $FN_SCRIPT
echo "= created: $FN_SCRIPT"

Script zur Clientkonfiguration: ExportClient[Bearbeiten]

Erzeugt Konfiguration für neuen Client (inklusive Erzeugung der Schlüssel). 

FN_SCRIPT=/etc/wireguard/ExportClient
cat <<'SCRIPT' >$FN_SCRIPT
#! /bin/bash
VPN_ID=$1
CLIENT=$2
IP_CLIENT=$3
ALLOWED_IPS=$4

function Usage(){
  echo "Usage: ExportClient VPN_ID CLIENT_NAME IP_CLIENT ALLOWED_IDS"
  echo "Example: ExportClient wg0 joe 10.10.100.44/32 10.10.100.0/24,10.10.101.0/24"
  echo "+++ $*"
}

function CreateIntern(){
  mkdir -p db/$VPN_ID/clients
  local fnConfig=db/$VPN_ID/clients/$CLIENT.conf
  cat <<EOS >$fnConfig
CLIENT=$CLIENT
PUB_KEY=$PUBLIC_KEY_CLIENT
ALLOWED_IPS=$ALLOWED_IPS
EOS
  echo "= created: $fnConfig"
  fnConfig=exported/$VPN_ID.$CLIENT.conf
  mkdir -p $(dirname $fnConfig)
  cat <<EOS >$fnConfig
EOS
}

function CreateExport(){
  local fnConfig=export/$VPN_ID.$CLIENT.conf
  mkdir -p $(dirname $fnConfig)
  source db/$VPN_ID/server.conf
  local privateKey=$(wg genkey)
  PUBLIC_KEY_CLIENT=$(echo $privateKey | wg pubkey)
  cat <<EOS >$fnConfig
VPN_ID=$VPN_ID
DNS_SERVER=$DNS_SERVER
IP_SERVER=$IP_PUBLIC
IP_CLIENT=$IP_CLIENT
PORT_SERVER=$PORT
ALLOWED_IPS=$ALLOWED_IPS
PRIV_KEY=$privateKey
PUB_KEY=$PUBLIC_KEY_CLIENT
PUBKEY_SERVER=$(cat /etc/wireguard/db/$VPN_ID/public.key)
EOS
  echo "= created: $fnConfig"
}
  fnConfig=exported/$VPN_ID.$CLIENT.conf
if [ -z "$ALLOWED_IPS" ]; then
  Usage "missing arguments"
elif [ ! -d db/$VPN_ID ]; then
  Usage "unknown VPN_ID: $VPN_ID"
else
  CreateExport
  CreateIntern
fi
SCRIPT
chmod +x $FN_SCRIPT
echo "= created: $FN_SCRIPT"

Wireguard-Konfiguration erzeugen[Bearbeiten]

cd /etc/wireguard
VPN_ID=wg0
./Build $VPN_ID
  • VPN neu starten
# Falls VPN läuft:
wg-quick down wg0
wg-quick up wg0

Konfiguration Server[Bearbeiten]

cd /etc/wireguard
VPN_ID=wg0
IP_SERVER=10.10.100.1/16
IP_PUBLIC=139.44.33.91
DNS_SERVER=9.9.9.9
HOST=$(hostname)
PORT=51820
./BuildServer $VPN_ID $IP_SERVER $IP_PUBLIC $HOST $PORT $DNS_SERVER

Konfiguration existierender Client (Public Key bekannt)[Bearbeiten]

VPN_ID=wg0
CLIENT=joe
IP_CLIENT=10.10.100.10/32
PUB_KEY=0fajdkafkdla02jiw902902=
ALLOWED_IPS=10.100.10.0/24
./ImportClient $VPN_ID $CLIENT $IP_CLIENT $PUB_KEY $ALLOWED_IPS

Erzeugen Client (Keys werden erzeugt)[Bearbeiten]

cd /etc/wireguard
VPN_ID=wg0
CLIENT=joe
IP_CLIENT=10.10.100.112/32
ALLOWED_IPS=10.10.100.0/24
./ExportClient $VPN_ID $CLIENT $IP_CLIENT $ALLOWED_IPS

Linux Client einrichten[Bearbeiten]

apt install wireguard-tools resolvconf

Script erzeugen[Bearbeiten]

FN_SCRIPT=/etc/wireguard/Import
cat <<'SCRIPT' >$FN_SCRIPT
#! /bin/bash
CONFIG=$1

function Usage(){
  echo "Usage: Import IMPORT_FILE"
  echo "Example: Import db/wg0.joe.conf"
  echo "+++ $*"
}

function Create(){
  local fn=$1
  source $fn
  if [ -z "$VPN_ID" -o -z "$DNS_SERVER" -o -z "$IP_SERVER" -o -z "$IP_CLIENT" ]; then
    echo "+++ wrong import data in $fn: vpn: $VPN_ID dns: $DNS_SERVER ip: $IP_SERVER ipcl: $IP_CLIENT"
  elif [ -z "$PORT_SERVER" -o -z "$ALLOWED_IPS" ]; then
    echo "+++ wrong import data: port: $PORT_SERVER allowed: $ALLOWED_IPS"
  elif [ -z "$PRIV_KEY" -o -z "$PUB_KEY" -o -z "$PUBKEY_SERVER" ]; then
    echo "+++ wrong import data: pub: $PUB_KEY priv: $PRIV_KEY pub-sv: $PUBKEY_SERVER"
  else
    local fnPrivate=/etc/wireguard/db/$VPN_ID.private.key
    mkdir -p $(dirname $fnPrivate)
    echo $PUB_KEY > db/$VPN_ID.public.key
    echo $PRIV_KEY > $fnPrivate
    chmod og= $fnPrivate 
    local config=/etc/wireguard/$VPN_ID.conf
    cat <<EOS >$config
[Interface]
Address = $IP_CLIENT
DNS = $DNS_SERVER
# Load your privatekey from file
PostUp = wg set %i private-key $fnPrivate
# Also ping the vpn server to ensure the tunnel is initialized
PostUp = ping -c1 $IP_SERVER

[Peer]
PublicKey = $PUBKEY_SERVER
Endpoint = $IP_SERVER:$PORT_SERVER
AllowedIPs = $ALLOWED_IPS
PersistentKeepalive = 15
EOS
    echo "= created: $config"
  fi
}
if [ -z "$CONFIG" ]; then
  Usage "Missing parameter CONFIG_FILE"
elif [ ! -e $CONFIG ]; then
  Usage "Missing configuration file $CONFIG"
else
  Create $CONFIG
fi
SCRIPT
chmod +x $FN_SCRIPT
echo "= created: $FN_SCRIPT"

Importieren der Daten[Bearbeiten]

mkdir -p /etc/wireguard
cd /etc/wireguard
CONFIG=/Downloads/wg0.joe.conf
./Import $CONFIG

VPN neu starten[Bearbeiten]

# Falls VPN läuft:
wg-quick down wg0
wg-quick up wg0
Abgerufen von „https://wiki.hamatoma.de/index.php?title=Wireguard&oldid=2311“