Aktuelle Version vom 21. Juli 2012, 10:49 Uhr

Installation u-boot

Minicom einstellen[Bearbeiten]

Als root:

minicom starten:
Wenn beim Start "/dev/modem nicht gefunden", dann:

cd /dev
ln -s ttyUSB0 modem

Strg-A O

Einstellungen zum seriellen Anschluss:
    | A - Serieller Anschluss      : /dev/ttyUSB0                           |
    | B - Pfad zur Lockdatei       : /var/lock                              |
    | C - Programm zur Rufannahme  :                                        |
    | D - Programm zum Wählen      :                                        |
    | E - Bps/Par/Bits             : 115200 8N1                             |
    | F - Hardware Flow Control    : Nein                                   |
    | G - Software Flow Control    : Nein                                   |

Links[Bearbeiten]

Installation auf USB-Stick[Bearbeiten]

Download[Bearbeiten]

DIR=/data/dreamplug
mkdir $DIR
cd $DIR
mkdir google debian
cd debian
wget ftp://ftp.debian.org/debian/dists/squeeze/main/installer-armel/current/images/kirkwood/netboot/marvell/sheevaplug/uInitrd
cd ../google
for file in dream_burn_spi.tar.bz2 linux-2.6.33.6.tar.bz2 dreamplug_debian_v0.2.zip.001 \
    dreamplug_debian_v0.2.zip.002 "Set Up A Debian File System In DreamPlug v0.2-20110519.pdf" \
    uImage "DreamPlug User Guide_US_v1.1.pdf"  uImage_2.6.33.7 ; do
 wget http://dreamplug.googlecode.com/files/$file
done
mkdir rootfs
cd rootfs
cat ../dreamplug_debian_v0.2.zip.001 ../dreamplug_debian_v0.2.zip.002 >debian_rootfs.zip
unzip debian_rootfs.zip
rm debain_rootfs.zip
cd $DIR

USB-Stick einrichten[Bearbeiten]

Zwei Partitionen: 50 Spuren (280 MB) FAT32, 3GByte ext4

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1          50       69376    c  W95 FAT32 (LBA)
/dev/sdc2              51        2781     3845248   83  Linux
</p>
# ======= Warnung: Falsche Definition von DEV zerstört ein Laufwerk ==========
DEV=sdc

mkfs.vfat -F 16 -n udream_boot /dev/${DEV}1
mkfs.ext4 -L udream_squeeze /dev/${DEV}2

mount /dev/${DEV}1 /media/trg
cd $DIR
cp debian/uInitrd /media/trg
cp cp google/uImage /media/trg
umount /media/trg

Mehr ist nicht nötig für Debian netboot.

Dreamplug von USB-Stick booten[Bearbeiten]

minicom

Funktionierende Einstellungen uboot:

version
U-Boot 2011.06-02334-g8f495d9-dirty (May 31 2011 - 02:06:26)
Marvell-DreamPlug

setenv many_args '1 2 3 4 ...'

baudrate=115200
x_bootcmd_usb=usb start
x_bootcmd_kernel=fatload usb 0 0x6400000 uImage
x_bootargs=console=ttyS0,115200
ethact=egiga0
ethaddr=F0:AD:4E:00:8E:8B
eth1addr=F0:AD:4E:00:8E:8C
x_bootargs_root=root=/dev/sdc2 rootdelay=10
y_bc_usb=usb start
y_bc_kernel=fatload usb 0 0x6400000 uImage
y_ba_root=root=/dev/sdc2 rootdelay=10
y_ba=console=ttyS0,115200
help=bc is bootcommand, ba is bootarg
y_s_eth=setenv ethact egiga0; ${x_bootcmd_ethernet}; setenv ethact egiga1; ${x_bootcmd_ethernet};
y_boot=${y_bc_usb}; ${y_bc_kernel}; setenv bootargs ${y_ba} ${y_ba_root}; bootm 0x6400000;
x_boot=run y_s_eth; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;
bootcmd=run x_boot
y_boot2=run y_s_eth; usb start; run y_boot
y_bc_eth=192.168.178.3
ipaddr=192.168.178.17
x_bootcmd_ethernet=ping 192.168.178.3
bootdelay=10
stdin=serial
stdout=serial
stderr=serial

Start von USB (Debian Netzinstallation):

usb start
fatload usb 2:1 0x00800000 /uImage
fatload usb 2:1 0x01100000 /uInitrd
setenv bootargs 'console=ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most'
bootm 0x00800000 0x01100000

Module und Firmware anpassen[Bearbeiten]

mount /dev/${DEV}2 /media/trg
cd $DIR
cp -a google/rootfs/all/lib/modules/* /media/trg/lib/modules
cp -a google/rootfs/all/lib/firmware/* /media/trg/lib/firmware
vi /media/trg/etc/fstab

Von USB booten[Bearbeiten]

usb start
fatload usb 2:1 0x00800000 /uImage
fatload usb 2:1 0x01100000 /uInitrd
setenv bootargs 'console=ttyS0,115200 root=/dev/sdc2 rootdelay=10'
bootm 0x6400000

Version 2:

usb start
fatload usb 0 0x00800000 /uImage.3.4.4
setenv bootargs 'console=ttyS0,115200 root=/dev/sdc2 rootdelay=10'
bootm 0x00800000

Version alt:

setenv bootcmd_usb 'usb start; fatload usb 2:1 0x00800000 /uImage'
setenv bootargs_console 'console=ttyS0,115200'
setenv bootargs_root 'root=/dev/sdc2 rootdelay=10'
setenv bootcmd 'setenv bootargs ${bootargs_console} ${bootargs_root}; run bootcmd_usb; bootm 0x6400000'
run bootcmd_usb
setenv bootargs '${bootargs_console} ${bootargs_root}'
bootm 0x6400000

WLan aktivieren[Bearbeiten]

/etc/modprobe.d/blacklist.conf (excerpt):

# guruplug wireless *client* modules
blacklist libertas
blacklist libertas_sdio

/etc/network/interfaces:

auto uap0
iface uap0 inet static
        pre-up modprobe uap8xxx
        post-up /etc/network/guruplug-wl-conf.sh start
        post-down /etc/network/guruplug-wl-conf.sh stop
        address 192.168.7.3
        netmask 255.255.255.0

FN=/etc/network/guruplug-wl-conf.sh
cat <<'EOS' >$FN
#!/bin/sh

SSID="regina-regio"
PW="some_password"
CH=5

PATH=/sbin:/bin:/usr/sbin:/usr/bin

case "$1" in
        start)  
                set -x -e
                uaputl sys_cfg_radio_ctl 0              # radio on
                uaputl sys_cfg_channel $CH              # set channel
                uaputl sys_cfg_ssid $SSID               # set SSID
                uaputl sys_cfg_protocol 32              # WPA2
                uaputl sys_cfg_cipher 8 8               # AES CCMP / AES CCMP
                uaputl sys_cfg_wpa_passphrase $PW       # set password
                uaputl bss_start                        # start the BSS
                set +x
                exit 0
                ;;

        stop)   
                set -x
                uaputl bss_stop                 # stop the BSS
                uaputl sys_cfg_radio_ctl 1      # radio off
                set +x
                exit 0
                ;;

        status) 
                echo "--------------------------------------------------------------------------"
                uaputl sys_info                 # display system info
                uaputl sta_list                 # display list of clients
                echo "--------------------------------------------------------------------------"
                exit 0
                ;;
esac

exit 1
EOS
chmod uog+x $FN

Bootimage erstellen[Bearbeiten]

mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n "Linux" -d vmlinuz-3.2.0-0.bpo.2-kirkwood uImage
mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d initrd.img-3.2.0-0.bpo.2-kirkwood uInitrd

Neuen Kernel installieren[Bearbeiten]

Download von sheeva-3.4.4-Modules.tar.gz + sheeva-3.4.4-System.map + dream-3.4.4-uImage http://www.xilka.com/sheeva/kernel

KVer=3.4.4
tar x -C / --overwrite -zf sheeva-$KVer-Modules.tar.gz
cp sheeva-$KVer-System.map dream-$KVer-uImage /boot/
depmod -eF /boot/sheeva-$KVer-System.map $KVer

Datenträger[Bearbeiten]

/dev/sdd8: LABEL="wd1_data" UUID="6f6d161c-cd65-4d02-84fb-96212fd125e8" TYPE="ext4"
/dev/sda2: LABEL="dreamv8_fs" UUID="26c4d755-bac1-4c6d-8419-6608fa25bf21" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda1: SEC_TYPE="msdos" LABEL="dreamv8_kr" UUID="510F-E85E" TYPE="vfat"
/dev/sdc1: SEC_TYPE="msdos" LABEL="udream_boot" UUID="C004-8ED1" TYPE="vfat"
/dev/sdc2: LABEL="udream_squeeze" UUID="ba61484c-bdad-4e1b-8811-2077cb7cce0f" TYPE="ext4"
/dev/sdd2: LABEL="w1_squeeze" UUID="86f0517f-8c0c-4a4a-b84a-7b4813c09cbd" TYPE="ext4"
/dev/sdd6: LABEL="wd1_swap" UUID="349862c4-7c5b-441a-91c4-3c7f9e4af8b9" TYPE="swap"

Installation DreamPlug: Unterschied zwischen den Versionen