Wireguard

Links

• Wireguard-ui

Installation

apt install wireguard resolvconf

Zentrale einrichten

WG_ID=wg0
KEY_PRIVATE=/etc/wireguard/$WG_ID.private.key
wg genkey | sudo tee $KEY_PRIVATE
chmod go= $KEY_PRIVATE
IP_SERVER=10.58.1.1/16

Linux Client einrichten

apt install wireguard-tools
WG_ID=vinfeos0
IP_SERVER=207.180.255.91
PUBKEY_SERVER=eK7tZw0WgbjjxkRdAwGvp8aAV/cfzhwpIymZdVTFE3k=
DNS_SERVER=9.9.9.9
PORT_SERVER=51820
IP2_SERVER=10.58.1.1
IP_CLIENT=10.58.1.11/32
ALLOWED_IPS=10.58.1.0/16
FN_CONFIG=/etc/wireguard/$WG_ID.conf

FN_KEY_PRIVATE=/etc/wireguard/$WG_ID.private.key
wg genkey | sudo tee $FN_KEY_PRIVATE
chmod go= $FN_KEY_PRIVATE
PUBKEY_CLIENT=$(wg <$FN_KEY_PRIVATE pubkey)
cat <<EOS >$FN_CONFIG
[Interface]
# The address your computer will use on the VPN
Address = $IP_CLIE:q:NT
DNS = $DNS_SERVER
# Load your privatekey from file
PostUp = wg set %i private-key $FN_KEY_PRIVATE
# Also ping the vpn server to ensure the tunnel is initialized
PostUp = ping -c1 $IP2_SERVER

[Peer]
# VPN server's wireguard public key
PublicKey = $PUBKEY_SERVER
# Public IP address of your VPN server (USE YOURS!)
Endpoint = $IP_SERVER:$PORT_SERVER
# 10.0.0.0/24 is the VPN subnet
AllowedIPs = $ALLOWED_IPS
# PersistentKeepalive = 25
EOS