Bearbeiten von „Installation DreamPlug“
Zur Navigation springen
Zur Suche springen
Warnung: Du bist nicht angemeldet. Deine IP-Adresse wird bei Bearbeitungen öffentlich sichtbar. Melde dich an oder erstelle ein Benutzerkonto, damit Bearbeitungen deinem Benutzernamen zugeordnet werden.
Die Bearbeitung kann rückgängig gemacht werden. Bitte prüfe den Vergleich unten, um sicherzustellen, dass du dies tun möchtest, und veröffentliche dann unten deine Änderungen, um die Bearbeitung rückgängig zu machen.
Aktuelle Version | Dein Text | ||
Zeile 1: | Zeile 1: | ||
[[Kategorie:Host]] | [[Kategorie:Host]] | ||
==Minicom einstellen== | ==Minicom einstellen== | ||
Zeile 85: | Zeile 83: | ||
setenv many_args '1 2 3 4 ...' | setenv many_args '1 2 3 4 ...' | ||
printenv | |||
bootdelay=3 | |||
baudrate=115200 | baudrate=115200 | ||
x_bootcmd_usb=usb start | x_bootcmd_usb=usb start | ||
Zeile 93: | Zeile 93: | ||
eth1addr=F0:AD:4E:00:8E:8C | eth1addr=F0:AD:4E:00:8E:8C | ||
x_bootargs_root=root=/dev/sdc2 rootdelay=10 | x_bootargs_root=root=/dev/sdc2 rootdelay=10 | ||
x_bootcmd_ethernet=ping 192.168.7.3 | |||
ipaddr=192.168.7.17 | |||
y_bc_usb=usb start | y_bc_usb=usb start | ||
y_bc_kernel=fatload usb 0 0x6400000 uImage | y_bc_kernel=fatload usb 0 0x6400000 uImage | ||
y_ba_root=root=/dev/sdc2 rootdelay=10 | y_ba_root=root=/dev/sdc2 rootdelay=10 | ||
y_bc_eth=ping 192.168.7.3 | |||
y_ba=console=ttyS0,115200 | y_ba=console=ttyS0,115200 | ||
help=bc is bootcommand, ba is bootarg | help=bc is bootcommand, ba is bootarg | ||
Zeile 101: | Zeile 104: | ||
y_boot=${y_bc_usb}; ${y_bc_kernel}; setenv bootargs ${y_ba} ${y_ba_root}; bootm 0x6400000; | y_boot=${y_bc_usb}; ${y_bc_kernel}; setenv bootargs ${y_ba} ${y_ba_root}; bootm 0x6400000; | ||
x_boot=run y_s_eth; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000; | x_boot=run y_s_eth; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000; | ||
stdin=serial | stdin=serial | ||
stdout=serial | stdout=serial | ||
stderr=serial | stderr=serial | ||
bootcmd=run y_boot | |||
</pre> | </pre> | ||
Start von USB (Debian Netzinstallation): | Start von USB (Debian Netzinstallation): | ||
Zeile 139: | Zeile 137: | ||
<pre> | <pre> | ||
usb start | usb start | ||
fatload usb 0 0x00800000 /uImage.3. | fatload usb 0 0x00800000 /uImage.3 | ||
fatload usb 0 0x01100000 /uInit.3 | |||
setenv bootargs 'console=ttyS0,115200 root=/dev/sdc2 rootdelay=10' | setenv bootargs 'console=ttyS0,115200 root=/dev/sdc2 rootdelay=10' | ||
bootm | bootm 0x6400000 | ||
</pre> | </pre> | ||
Version alt: | Version alt: | ||
Zeile 152: | Zeile 151: | ||
setenv bootargs '${bootargs_console} ${bootargs_root}' | setenv bootargs '${bootargs_console} ${bootargs_root}' | ||
bootm 0x6400000 | bootm 0x6400000 | ||
</pre> | </pre> | ||
Zeile 223: | Zeile 158: | ||
mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d initrd.img-3.2.0-0.bpo.2-kirkwood uInitrd | mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d initrd.img-3.2.0-0.bpo.2-kirkwood uInitrd | ||
</pre> | </pre> | ||